Make sure the tape is securely immersed in the compound. The dried coat will be blistering with bubbles if this step is skipped. The tape should be totally embedded in the mixing mud. It’s a good idea to do this before sticking the tape to the wall, as it will assist in maintaining an even surface. If the tape is wet but not soaked, you will have the best results. If you want to embed the tape into the compound, all you have to do is run water over it first. Wetting the tape before applying it is one great way to avoid complications. Make sure you have enough compound mix to complete the job. If you do a rushed job and leave gaps and spaces in the joint, bubbles will form as a result. If not, certain areas may loosen or bubble.ĭrywall joints must be completely covered with generous amounts of your mud mix. The correct tools and compounds will minimize errors.Īfter application, the compound should be totally embedded in the tape. Tools like a joint knife are designed for this specific job. Having the correct tools for the job will minimize the risk of any potential problems arising, like bubbles in your drywall tape.įor example, if you use the correct knife to spread the compound, your life will be much easier in the long run. When choosing your compound at the store, don’t be afraid to ask for help, especially if this is your first DIY drywall job. A lumpy compound is a sure way to end up with bubbles. It should be nice and smooth, so no lumps or bumps exist. The consistency of the mud is also important. You don’t want it dripping down the walls, either. While lightweight mud is a better solution, make sure it is not too light. If your mix is too thick, it will be hard to spread, and you could easily tear the tape in the process. You must eliminate the air bubbles because ripples in the tape that are not removed will show after the wall has been painted.īefore starting, make sure your mud mixture has the correct consistency. If there are any gaps due to inadequate mixing of the compound, or mud, the tape and the drywall will not bond together in that area.Īs a result, air pockets will form beneath the tape, and bubbles will appear.Īnd if you think that small bubbles won’t affect the end result, think again. When you apply the tape to the drywall joint, the joint must be completely sealed. To avoid bubbles on your next drywall job, you must first understand why they occur during installation. When it comes to DIY jobs, prevention is always better than a cure. If this is your first drywalling project, you have come to the right place.īy researching the common pitfalls of drywalling before you begin, you will save time and effort in the long run. 10 Tips for Fixing Bubbled Drywall Tape.How to Avoid Drywall Tape From Bubbling.In this article, we will explain why bubbles may appear in your drywall tape, how to avoid this from happening to you, and what you can do to fix it if it does happen. If you don’t want bubbles to form in the tape, the drywall and tape must completely bond together over the entire joint. The reason bubbles appear in your drywall tape is because of improper installation. There’s nothing worse than completing a DIY job only to realize that you need to strip all your work down and start again.ĭrywalling may just be one of those jobs if you don’t pay attention to the common pitfalls of the job.Īnd one of those common pitfalls is ending up with bubbles in your drywall tape. Please read my disclaimer for additional details. As an Amazon Associate, I earn from qualifying purchases. *This post may have affiliate links, which means I may receive commissions if you choose to purchase through links I provide (at no extra cost to you).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |